The GEPRC TAKER Stack – F405 FC+ 50A 3-6S BLHeli_S ESC is a plug-and-play system designed for the DJI Air Unit. It includes an STM32F405 chip, ICM42688-P gyroscope, integrated 16M black box, and GEP-BLS50A-4IN1 ESC for enhanced control. It plugs directly into the DJI Air Unit, eliminating soldering, and features an upgraded type-C USB connector for improved durability. With dual independent BEC providing 9V 2.5A + 5V 3A, it ensures a stable power supply for external devices.

• Equipped with the latest 42688-P gyroscope
• Simple and reasonable installation method
• 9V 2.5A + 5V 3A dual independent BEC
• Directly plugged into the DJI Air Unit
• Upgrade type-C USB interface
• With GEP-BLS50A-4IN1 ESC
• 16M black box storage
• Integrated LC filter
• STM32F405 chip

GEP-F405-HD V2 FLIGHT CONTROLLER

• Size: 36.8×36.8mm, hole 30.5×30.5mm, 4mm hole becomes 3mm after using a silicone shock-absorbing circle
• Air Unit Connection: Direct plugging into DJI Air Unit
• OSD: BetaFlight OSD with AT7456E chip
• Power Filter: Integrated LC filter
• Firmware Target: GEPRCF405
• Black Box: 16M onboard
• Input Voltage: 3-6S LiPo
• IMU: ICM42688-P (SPI)
• USB Connector: Type-C
• BEC: 5V, 9V dual BEC
• MCU: STM32F405
• UART: 6
• Weight: 7.7g

GEP-BLS50A-4IN1 ESC

• Size: 42.9×39.7mm, hole 30.5×30.5mm, 4mm hole becomes 3mm after using the silicone shock-absorbing circle
• Support Protocol: Oneshot125/Oneshot42/Multishot modes/Dshot 150/300/600
• Continuous Current: 50A
• Input Voltage: 3-6S LiPo
• Galvanometer: Support
• Burst Current: 55A (5s)
• Target: G_H_30
• Weight: 13.7g

• 1x Flight Controller Adapter Cable
• 1x DJI Air Unit Adapter Cable
• 2x SH1.0 4-pin silicone cable
• 1x Camera connection cable
• 8x Silicone grommets
• 1x XT60 Power cable
• 1x Flight Controller
• 4x M3x30 Screws
• 4x M3x24 Screws
• 8x Nylon nuts
• 1x Capacitor
• 1x ESC