SpeedyBee F405 V4 Flight Controller – 30×30

SpeedyBee F405 V4 Flight Controller – 30×30

Elevate your drone’s performance with the SpeedyBee F405 V4 Flight Controller, featuring STM32F405 MCU and ICM42688P gyro for precise control.

In stock

3,599

In stock

Same Day Shipping

Mon-Sat til 2.00PM on Most orders

Provide Warranty

Seller & Manufacturer Warranty

Svg Vector Icons : http://www.onlinewebfonts.com/icon

Best Prices

Best Prices in India

Best Customer Support

Industry leading support

Elevate your drone’s performance with the SpeedyBee F405 V4 Flight Controller, featuring STM32F405 MCU and ICM42688P gyro for precise control. The compact F405 V4 flight controller supports Bluetooth configuration and 6S LiPo power input, making it a versatile choice for FPV enthusiasts.

Features

  • The compact design fits 30.5 x 30.5mm mounting on various frames.
  • Precise control with STM32F405 MCU and ICM42688P gyro.
  • Easy in-flight controller configuration via Bluetooth.

Specifications

  • MCU: STM32F405
  • IMU(Gyro): ICM42688P
  • USB Port Type: Type-C
  • Barometer: Built-in
  • OSD Chip: AT7456E chip
  • BLE Bluetooth: Supported for Flight Controller configuration (MSP enabled with Baud rate 115200 on UART4)
  • WIFI: Not supported
  • DJI Air Unit Connection Way: Two ways supported – 6-pin connector or direct soldering.
  • 6-pin DJI Air Unit Plug: Supported and compatible with various DJI models, no wire changes needed.
  • Blackbox MicroSD Card Slot: Compatible with Standard (SDSC) or High Capacity (SDHC) cards under 32GB.
  • Current Sensor Input: Supported (for SpeedyBee BLS 55A ESC, set scale = 400 and Offset = 0).
  • Power Input: 3S – 6S LiPo (Through G, BAT pins/pads).
  • 5V Output: 9 groups of 5V output.
  • 9V Output: 2 groups of 9V output.
  • 3.3V Output: Supported up to 500mA current load.
  • 4.5V Output: Supported up to 1A current load.
  • ESC Signal: M1 – M4 on the bottom side, M5-M8 on the front side.
  • UART: 6 sets (UART1, UART2, UART3, UART4 (Dedicated for Bluetooth connection), UART5 (Dedicated for ESC telemetry), UART6).
  • ESC Telemetry: UART R5 (UART5).
  • I2C: Supported for various sensors.
  • Traditional Betaflight LED Pad: Supported for WS2812 LED controlled by Betaflight firmware.
  • Buzzer: BZ+ and BZ- pad used for 5V Buzzer.
  • BOOT Button: Supported for firmware flashing and LED control.
  • RSSI Input: Supported (named as RS on the front side).
  • Smart Port / F.Port: Not supported.
  • Supported Flight Controller Firmware: BetaFlight (Default), INAV.
  • Firmware Target Name: SPEEDYBEEF405V4.
  • Mounting: 30.5 x 30.5mm (4mm hole diameter).
  • Dimension: 41.6(L) x 39.4(W) x 7.8(H)mm.
  • Weight: 10.5g.

Includes

  • 1x SpeedyBee F405 V4 Flight Controller
  • 5x M3*8mm Silicone Grommets (for FC)
  • 1x SH 1.0mm 30mm-length Spin Cable (for FC-ESC connection)
  • 1x DJI 6-pin Cable (80mm)
Weight50 g

Reviews

There are no reviews yet.

Be the first to review “SpeedyBee F405 V4 Flight Controller – 30×30”

Please login to post questions
SpeedyBee F405 V4 Flight Controller – 30×30

In stock

We are temporarily not accepting Orders

    There is nothing much we are happy than helping you out with the latest FPV gears, and offering top notch aftersales support. But we have stopped accepting orders till further notice due to ill-defined reasons. 

Thank you for all the support you have given us in the past. You are the reason why we are called India’s Premier and Finest FPV Store. So Don’t hold Back; We will be back in:

Days
Hours
Minutes
Seconds