MAMBA Basic F722 Mini MK3 FC M2/20MM

MAMBA Basic F722 Mini MK3 FC M2/20MM

In stock

4,699

MAMBA Basic F722 Mini MK3 FC M2/20MM

4,699

Description

MAMBA Basic F722 Mini MK3 FC M2/20MM

Description

MAMBA | Super Big Soldering Pad

MAMBA Basic F722 MINI MK3

Diagram Link From Help Centre Link

Fixed

  • Add I2C function
  • When you connect the USB, the receiver and OSD settings can be saved
  • Increase the pad area
  • LED signal selection (when Mamba Led sys avaiable)
  • BEC short circuit protection
  • TVS instant high voltage protection 30V

Update

  • Upgrade the anti-interference cable
  • Use Type C(Most)
  • The pad area of the Mini flight controller (20×20) increased by 140%

Added

  • Add self-recovery insurance to the receiver’s 5V power supply.
  • Increase the camera VCC power supply pad.
  • The standard flight controller (30.5×30.5) adds a spare pad.
  • Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.

Specification:

Mamba Basic F722 MINI MK3 FC

MCU: 216MHz STM32F722RET6
IMU: MPU6000
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 6 Set
ESC Soft: Dshot300/600/1200
ESC Telemetry: Yes
Power Led: Yes
LED Controller:BF LED
F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A&5V 2.5A
MOUNTING: 20mm,M2

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “MAMBA Basic F722 Mini MK3 FC M2/20MM”